Ford 6.0L Powerstroke Diesel IPR Screen Injector Pressure Regulator Seal Kit

$249.95 $139.95


Share on facebook
Share on telegram
Share on twitter
Share on email



2003-2007 Ford 6.0L F250/350/450/550, 2004-2010 Ford 6.0L E-Series Vans, and 2003-2005 Ford 6.0L Diesel Excursions. 6.0L Powerstroke IPR Repair Kit – You may not need a new IPR Valve! – – Genuine International Parts – (fits all 2003 – 2010 6.0L) also fits International VT275 and VT365 The IPR Valve on your Powerstroke is responsible for controlling the pressure in the high-pressure oil system which in turn operates the fuel injectors.
The IPR (injection pressure regulator) is located on the high pressure oil pump at the front of the engine’s valley. Because of the high pressures they are responsible for controlling, the IPR valve o-rings are a semi-common failure which will in turn result in such low oil pressure related symptoms as poor idle, stalling, and even a no-start condition. While there are other potential causes, such as a failed IPR valve, the o-rings themselves are often at fault, and are much less expensive to replace.
The IPR valve screen is another common failure. The screen may become plugged with debris and be collapsed by the flow of high pressure oil as it tries to flow through the restricted screen. A torn screen will allow debris to enter the IPR valve which may damage the valve.

This kit includes: (1) Backup ring (1) Orifice O-ring (1) O-ring seal (1) IPR Screen.
Use in place of the following part numbers: 3C3Z9H529A, AP0035