NEW AA AAA C D 9V UNIVERSAL BATTERY TESTER VOLT CHECKER BVCB
Perfect for Home Use
Battery failure is one of the most common causes for sensor or instrument failure. The BAT-200 Battery Tester indicates the amount of charge remaining in standard and rechargeable batteries. The analog display needle moves on a color-coded, calibrated scale to quickly identify “good” (green), “low” (yellow), and “replace/recharge” (red) battery status. The BAT-200 tests 9V, AA, AAA, C, D and 1.5V Button Type batteries. Tester does not require any internal batteries to operate.
Operating the BAT-200
Battery voltage decreases as the battery is discharged. Slightly used batteries may show close to full voltage. This means as long as the battery is not in the yellow or red field (indication of low voltage); the battery does not need to be replaced.
High Current/High Load Situations
For testing batteries used in high current/high load situations such as digital cameras, the battery may need to be replaced when tester indicates battery charge is in the low end of the “good” range (near yellow field). These batteries can still be used in low load applications such as in remote controls.
Testing Different Battery Types
Rechargeable Batteries are typically 1.2V when fully charged versus 1.5V for normal alkaline batteries, but they have a higher battery capacity (mAh). Because the BAT-200 tests for voltage, these batteries are still usable when the tester indicates green or yellow fields. When testing batteries, ensure the negative terminal is on top (battery upside down). For button batteries (1.5V only), the negative terminal is on top (look on printing on top of battery to verify terminals and 1.5V voltage).
What’s in the Box
BAT-200 Battery Tester – User’s Manual
Easy-to-read color-coded display with “Good”, “Low” and “Replace/Recharge” indicators
Test standard and rechargeable batteries: 9V, AA, AAA, C, D, 1.5V Button Type
No batteries required to operate
Portable handheld design, perfect companion for travel
Test the capacity of your battery in seconds
Double easy-to-read color-coded scales indelicate power level
One movable arm to accommodate the battery
Two buttons on the side for testing 9 volt batteries
Test different sizes of batteries in only one unit
Used to test the following sizes:
1.5V: AAA, HP16, MN2400, R03
AA, HP7, MN1500, UM3
C, HP11, MN1400, SP11, LR14, UM2
D, HP2, MN1300, SP2, R20,UM1
9V: PP3, MN1604, 6F22, 006P
All kinds of button cell
The battery tester is activated by the battery being checked. Keep test times as short as possible, to avoid unnecessary battery drain.
AAA battery not included
Original box: NO
Item size: 110*59*25mm
Net weight: 51g
Package weight: 60g
Packing content: 1 x Battery Tester