NEW DRILL / MANUAL POWERED WIRE STRIPPER MWS25 !
Price @ $159.95
Portable and easy to use
Used for removing the plastic and rubber insulation from undamaged scrap wire
Hand-cranking/manual stripping, can also be connected with electric drill for automatic operation(with drill connector head)
Easily mounts to table, bench and work station
Material: Aluminum Alloy
Wire Gauge Range: 1.5-25mm
Overall Dimension: 6″L x 5″W x 12″H (15x13x31cm)
Weight: 10.8lbs (4.9kg)
1x Wire Stripping Machine
1x Drill Connecting Head
1x Screw Set
SPARE BLADE @ 39.95 EA
NEW TABLE TOP CABLE STRIPPER AWS25
Price @ $399.95
Single Phase 1/4HP Motor runs off of any wall outlet
Strips 14 gauge to 1-1/4″ size wires.
Dimensions: 8″ W x 12″ D x 13″ H
Stripping speed: Approx. 60 feet per minute
Brand New in Box
SPARE BLADE @ 39.95 EA
NEW COPPER WIRE STRIPPING MACHINE 1.5 INCH AWS35
Price @ $699.95
This cable peeling machine is easy to transport and ready for use just with a 110V power supply and a stable table. It is an equipment of recycling copper and aluminum from a large number of scrap wires. It reliably splits cables between 0.06 inch and 1.5 inch with up to 65.6 feet per minute.
Adjuster- Used to adjust the distance of blades up and down.
Stop button- Stop machine.
Feeding hole- Fit for the scrap cables diameter within Φ.6″-1.5″. (1.5mm-38mm)
Input the cables according to the feeding hole.
The cables should be corresponding with feeding hole.
Check the rotating direction of the machine, you cna operate wen the direcion rightly, or else change the connector direction.
Make sure that the diameter of cables is similar with that of the feeding holes: large cables in large feeding holes, small cables in small feeding holes, and flat cables in flat feeding holes.
Check the machine before using in case that there is something in the machine brokes blades; To extend the blades life, user need to cut the cable joint when feeding.
Multi-holes for varieties of diameter
Strips cables with a diameter from Φ0.06″-Φ1.5″
Suitable for processing varieties of cables like electric wire, aluminum wire, metal cables and etc
It’s frame dual blades principal can process different diameter cable
This model is automaticall and manualy dual-using
Whatever hard wire or soft wire, it always can be easily stripped by use this model
Voltage: 110V 60Hz
Wire range: Φ0.06″-Φ1.5″/Φ1.5mm-Φ38mm
Blades quantity: 10
Holes quantity: 11
Wire material: Vehicle line, communication cable and micellaneous line
HEAVY DUTY 21 CHANNEL WIRE STRIPPER CUTTER CABLE MACHINE AWS40B WS31X
Price @ $1495.95
New Wire Stripping Machine 21 Channel
This Machine applies to most types of electric wires and cables, copper clad aluminum wires, steel wires, etc..
Special for sing-core or two-core flat electrical wires.
This machine has 21 holes, including 13 round wire holes, 2 double holes (can strip double core flat wires), 5 rack cutter holes (can strip RVV), and 1 pressure hole (can strip directly Mono filament line).
Cutting channels: 21;
Wire Range: 1mm (18 Gauge) – 42mm (1.65 Inches)
Machine Weight: 250 Lbs
Motor Power: 3 HP
Motor Voltage: 120V 60Hz
Daily Output 1200 lbs – 2400 Lbs Daily