NEW HEAT POWERED STOVE FAN WOOD BURNING FAN WBF1127
COMPARE AT $89.95
1 Powered by heat without electricity or battery. A wood stove fan that draws energy from the heat generated by your fireplace, wood burning stove or pellet furnace. Effectively disperses the hot air around your room
2 The lower surface temperature of the fan reaches about 50 °C (122 °F), and the working temperature is between 50 °C (122 °F) and 350 °C (662 °F). The higher the temperature of the furnace, the faster the speed. When the furnace temperature is low until the fire is extinguished, the speed is slowed down until the rotation stops.
3 Make the most of the heat from the wood stove and distribute it to your room. The fan circulates hot air at 270 cubic feet per minute, with a top speed of 360 cubic feet and 28% wood. You can enjoy the warmth in the room and increase your comfort.
4 [safe design] bimetal safety device. A bimetallic safety device is mounted on the bottom of the fan. When the surface temperature rises above about 250 degrees Celsius, it gently lifts the front of the fan to protect the TEG and the motor. When the surface temperature drops, the fan will automatically return to normal.
5 [unique blade design] The working noise is small and the airflow is larger. The unique fan blade design is more able to drive the warm air, and there is almost no noise in the work.
Air volume 180-210
Leaf 4 leaves
Wind speed 1100rpm
Working temperature 60-350°c
1. Place the furnace fan on a smooth, flat surface of the furnace top, near the side or back of the chimney.
2. The furnace fan is designed for independent stoves, and the surface temperature of the furnace is between 65 °C and C 350 °C. Temperatures above this range can damage fans and generator sets and void your warranty.
1*4 leaf fan